FusoFlex

Silvershine-ZFU(PH):

Lime titania covering to drive the advantages of pleasing operating characteristics on DC (+) as well as AC (70V).
Soft & stable arc with ease of striking.Smooth running with negligible spatter.
Easy slag detachability.
Smooth & finely rippled weld beads.

Identification:Name Printed

Application:

Tanks & process vessels, piping systems, agitators, rotors, cast pumps and valves, for use in fertilizer, phosphoric, sulphuric and acetic acid plants, paper mill plants.
Salt & seawater environment.
Offshore applications including overlays on carbon steelsand low alloy steels.
Suitable for welding several proprietory steels - Uddeholm 904L, Sandvik2RK65, Avesta 254SLX, Uranus B6&B6M, Cronifer 1925LC, etc.

Carbon	Manganese	Silicon	Chromium	Nickel	Molybdenum	Copper	Sulphur	Phosphorus
0.030	1.0-2.5	0.75	19.0-21.5	24.0-26.0	4.20-5.20	1.20-2.00	0.020	0.030

Ultimate Tensile Strength kg/mm²	Elongation (L=4d)%	CVN Impact Value Joules at 20°C
57-69	32-45	60-100

For best results use electrodes on DC (+)
In line with the safe practices in welding of austenitic stainless steel, avoid build-up of heat, and keep the interpass temperature below 150°C.
Use short arc to the extent possible.
Redry electrodes at 250-300°C for 30-60 minutes, after taking care to place the electrodes in the oven at room temperature. Thereafter, allow the oven to cool to 50°. 60°C and maintain at this temperature before removing electrodes for using.