FusoFlex

Silvershine-316:

Lime-titania all position electrodes.
Soft & stable arc with ease of striking and with negligible spatter.
Self-peeling slag.
Smooth bead appearance with fine ripples.
Weldable on AC and DC+ polarity.
Austenitic weld deposit which contains appropriate quantity of 'FERRITE' to prevent cracking.
High resistance to general and intergranular corrosion and to creep.
Especially resistant to sulphuric acid.
Heat resistance is much better than that of 18Cr-8Ni stainless steel welds.

Identification:Name Printed

Carbon	Manganese	Silicon	Chromium	Nickel	Molybdenum	Sulphur	Phosphorus
0.070	0.5-2.0	0.90	17.0-20.0	11.0-14.0	2.0-3.0	0.03	0.040

Ultimate Tensile Strength kg/mm²	Elongation (L=4d)%	CVN Impact Value Joules at 20°C
56-66	30-42	56-80

Ensure that electrodes are dry enough. In case of moisture pick-up, redry the electrodes at 250°C for 30 to 60 minutes. Thereafter, either allow the oven to cool slowly to about 60°C or transfer them to a holding oven maintained at 50°C-60°C.
Clean the joint faces to remove moisture, grease or any foreign matter.
Employ welding currents within the prescribed range.
Keep the arc as short as possible.
Restrict weaving of electrode to within two and a half times the core wire diameter.
Use stainless steel wire brush for cleaning the weld beads.