FusoFlex

Silvershine-309:

Lime-titania all position electrodes.
Negligible spatter, easy slag release; smooth bead appearance.
High quality weld deposit with defect-free radiographic performance in multipass welds.
High resistance to embrittlement.
Good resistance to corrosion and to heat
Good for service at elevated temperatures up to 1100°C.
For welding steels of similar composition.
For root passes in clad steel.
Weldable on AC and DC(+).

Identification:Name Printed

Carbon	Manganese	Silicon	Chromium	Nickel	Sulphur	Phosphorus
0.10	0.5-2.5	0.90	22.0-25.0	12.0-14.0	0.025	0.040

Ultimate Tensile Strength kg/mm²	Elongation (L=4d)%	CVN Impact Value Joules at 20°C
56-66	30-44	56-80

Ensure that electrodes are dry enough. In case of moisture pick-up, redry the electrodes at 250°C for 30 to 60 minutes. Thereafter, either allow the oven to cool slowly to about 60°C or transfer them to a holding oven maintained at 50°C-60°C.
Clean the joint faces to remove moisture, grease or any foreign matter.
Employ welding currents within the prescribed range.
Keep the arc as short as possible.
Restrict weaving of electrode to within two and a half times the core wire diameter.
Use stainless steel wire brush for cleaning the weld beads.